Registesr Login Quotation
Language
中文 English Deutsch Italiano Español 日本語
Company News Industry News Video Media Knowledge Center
Precisioner at FUNDIEXPO 2026: Full-Tonnage Mold Capability Meets Americas Nearshoring Demand

Precisioner at FUNDIEXPO 2026: Full-Tonnage Mold Capability Meets Americas Nearshoring Demand

At Booth 3119 in Monterrey, the mold specialist pairs a 60–6,600-ton mold manufacturing range with plans for U.S. and Mexico offices to support the region's nearshoring wave.

2026-10-30
Precisioner to Exhibit at FUNDIEXPO 2026: Focusing on Capacity Upgrade and Americas Localization

Precisioner to Exhibit at FUNDIEXPO 2026: Focusing on Capacity Upgrade and Americas Localization

From October 28–30, 2026, Precisioner will exhibit at GIFA Mexico & FUNDIEXPO 2026 at Cintermex in Monterrey, Mexico. We cordially invite global clients to visit us at Booth 3119.

2026-10-22
First Melt Countdown: Precisioner's 300T–800T Presses Enter Die Trial Commissioning

First Melt Countdown: Precisioner's 300T–800T Presses Enter Die Trial Commissioning

Shenzhen, China — October 2026. Precisioner (Shenzhen Precisioner Diecasting Mold Co., Ltd.), an aluminum, magnesium and zinc HPDC mold specialist since 2009, announces that the die casting press department at its new Pingshan plant is now assembled and in trial operation.

2026-10-20
Assembly Underway: Six New Die Casting Presses Take Shape at Yizumi for Precisioner's Pingshan Plant

Assembly Underway: Six New Die Casting Presses Take Shape at Yizumi for Precisioner's Pingshan Plant

On the assembly floor at Yizumi's manufacturing facility, six high-pressure die casting (HPDC) presses are taking shape side by side — frames squared, injection units aligned, control panels wired in.

2026-10-19
Precisioner Breaks Ground on New Facility

Precisioner Breaks Ground on New Facility

Construction is now underway on a new Precisioner facility in Shenzhen's Pingshan District, as the die casting mold specialist broke ground in September 2026.

2026-09-03
Precisioner Expands Die Trial Range —— 6 Press Sizes · One-Stop Process Validation

Precisioner Expands Die Trial Range —— 6 Press Sizes · One-Stop Process Validation

Shenzhen, China – Precisioner, a specialized manufacturer of highpressure die casting (HPDC) molds for aluminum, magnesium, and zinc alloys, has expanded its inhouse die trial capability with seven new presses covering 300T to 4500T.

2026-09-02
Precisioner Concludes 2026 Summer Internship Program with Closing Ceremony

Precisioner Concludes 2026 Summer Internship Program with Closing Ceremony

On August 29, Precisioner hosted a closing ceremony at its Dongguan plant to celebrate the successful completion of its 2026 Summer Internship Program.

2026-09-01
Precisioner Exhibits at SEA Diecasting 2026

Precisioner Exhibits at SEA Diecasting 2026

Chonburi, Thailand – May 21, 2026 – Precisioner, a company focused on high‑pressure die casting (HPDC) molds for 17 years, is attending the 2026 SEA (Thailand) Die Casting Conference & Exhibition on May 21–22 at the Bangsaen Heritage Hotel, Chonburi.

2026-05-22
Precisioner Expands into Fixture & Jig Manufacturing

Precisioner Expands into Fixture & Jig Manufacturing

Precisioner, a diecasting mold specialist with 17 years of industry experience, has officially expanded its business to include fixture and jig manufacturing.

2026-03-27
Precisioner at EUROGUSS 2026: Your Technical Partner for Diecasting Mold

Precisioner at EUROGUSS 2026: Your Technical Partner for Diecasting Mold

Following the successful close of EUROGUSS 2026 in Nuremberg, Precisioner has marked a significant milestone in its global outreach.

2026-01-17
Precisioner at EUROGUSS 2026: Your Technical Partner Awaits at Booth 4-370

Precisioner at EUROGUSS 2026: Your Technical Partner Awaits at Booth 4-370

The global die-casting elite is converging on Nuremberg. Precisioner is here. With 16 years of focus, we’re at EUROGUSS 2026 (Booth 4-370) not just to show HPDC dies and trim dies, but to deliver reliable, precise, and collaborative solutions. We are ready for you.

2026-01-14
Countdown | Meet Precisioner at Booth 4-370 in Nuremberg, Germany

Countdown | Meet Precisioner at Booth 4-370 in Nuremberg, Germany

With 16 years of deep expertise in high pressure die-casting molds and a client base spanning over 30 countries and regions, Precisioner is well-versed in international die-casting standards.

2026-01-09
Die-Casting Solutions & Panda Gifts - Visit Precisioner at Booth 4-370 in Nuremberg

Die-Casting Solutions & Panda Gifts - Visit Precisioner at Booth 4-370 in Nuremberg

Precisioner is not just a high pressure die-casting mold manufacturer; we are your on-site technical partner.

2026-01-06
Precisioner: Technology-Centric, with a Service Network Covering Europe

Precisioner: Technology-Centric, with a Service Network Covering Europe

As a National High-Tech Enterprise, Precisioner operates from two major production bases in Shenzhen and Dongguan.

2025-12-30
Precisioner Showcases Technology and Quality at EUROGUSS 2026

Precisioner Showcases Technology and Quality at EUROGUSS 2026

Precisioner will participate in the global die-casting industry event—EUROGUSS 2026 in Nuremberg, Germany, this January.

2025-12-26
Precisioner Secures Three Key ISO Certifications (ISO 9001, 14001, 45001)

Precisioner Secures Three Key ISO Certifications (ISO 9001, 14001, 45001)

In December 2025, Precisioner officially obtained certifications for the ISO 14001 and ISO 45001 management systems, while also successfully passing the ISO 9001:2015 quality management system surveillance audit.

2025-12-23
Precisioner Shines at 2025 Toyota Tsusho M&E Mini Expo, Exploring Automotive Die-Casting Tech Together

Precisioner Shines at 2025 Toyota Tsusho M&E Mini Expo, Exploring Automotive Die-Casting Tech Together

The 2025 Toyota Tsusho M&E Mini Expo has successfully concluded! We sincerely thank the organizer, Toyota Tsusho M&E, and every visitor who stopped by the Precisioner Booth #12.

2025-12-09
Precisioner will exhibit at the 2025 Fengtong Mini Expo

Precisioner will exhibit at the 2025 Fengtong Mini Expo

Precisioner will be exhibiting at the Fengtong Mini Expo 2025 in Guangzhou, an event which puts a spotlight on the latest advancements in automotive die-casting molds.

2025-12-03
Precisioner to Showcase HPDC Mold Solutions at EUROGUSS 2026

Precisioner to Showcase HPDC Mold Solutions at EUROGUSS 2026

Precisioner is proud to announce its participation in EUROGUSS 2026 – Europe's leading die-casting exhibition.

2025-11-19
Precisioner & Hongteo Win “Excellence Award​” at the 19th China Diecasting

Precisioner & Hongteo Win “Excellence Award​” at the 19th China Diecasting

Precisioner, in collaboration with Guangdong Hongteo Accurate Technology Zhaoqing Co., Ltd., has been honored with the "Excellence Award" in “Best Die Casting Competition” at the 19th China Diecasting & China Nonferrous (July 2025).

2025-07-23
  •  «   1   2   …   3   4   Next»   共67条/4页 

    • Recommended

    More

    One Good Die-Trial Sample Does Not Mean a Stable Process

    2026-11-04

    Precisioner at FUNDIEXPO 2026: Full-Tonnage Mold Capability Meets Americas Nearshoring Demand

    2026-10-30

    From Simulation to 35,000 Parts: Using MAGMASOFT to Diagnose and Prevent Cavitation Recurrence in HPDC Dies

    2026-10-29

    Rough Machining Allowance, Datums, and Tool Selection: The First Line of Defense for Die Precision

    2026-10-26

    Precisioner to Exhibit at FUNDIEXPO 2026: Focusing on Capacity Upgrade and Americas Localization

    2026-10-22
    Copyright 2009-2026 © Shenzhen Precisioner Diecasting Mold Co., Ltd.
    Tel: +86 755 2344 8600 E-mail: info@precisioner.com
    E-mail
    info@precisioner.com
     erweima
    wechat code
     tel
    +86 755 2344 8600