Registesr Login Quotation
Language
中文 English Deutsch Italiano Español 日本語
Company News Industry News Video Media Knowledge Center
Thermal Expansion Effects on Slide Clearance and Compensation Strategies

Thermal Expansion Effects on Slide Clearance and Compensation Strategies

A slide with a guide width of 300 mm will expand by approximately 0.72 mm across its width under a 200 °C temperature rise.

2026-07-23
Calibration of Simulation Boundary Conditions: Improving Accuracy Through Real-World Measurement

Calibration of Simulation Boundary Conditions: Improving Accuracy Through Real-World Measurement

"Our simulation results never quite match reality." This is a common frustration we hear from many die casting manufacturers.

2026-07-13
Cooling Channel Design Based on Fourier's Law: Distance, Spacing, and Thermal Hot Spot Control

Cooling Channel Design Based on Fourier's Law: Distance, Spacing, and Thermal Hot Spot Control

For every 1 mm increase in the distance from the cooling channel to the cavity surface, cooling efficiency drops by about 20% under typical HPDC conditions—this is a direct corollary of Fourier's law.

2026-07-06
Effect of Gate Velocity on Erosion: A Quantitative Relationship Based on a Power-Law Model

Effect of Gate Velocity on Erosion: A Quantitative Relationship Based on a Power-Law Model

Most mold designers know that higher gate velocity accelerates erosion. What is less understood is the scale of the effect. If you reduce gate velocity by 11%, how much does erosion actually drop?

2026-06-26
The Mechanical Nature of Flash: Why Clamping Force Alone Won't Fix It

The Mechanical Nature of Flash: Why Clamping Force Alone Won't Fix It

Flash occurs when local contact pressure drops below melt pressure. But why does simply increasing clamping force often fail? The answer lies in elastic deformation of the mold frame.

2026-06-18
Precisioner | High-Pressure Die Casting (HPDC) Simulation

Precisioner | High-Pressure Die Casting (HPDC) Simulation

Exclusive offer: Send your part drawing (or defect description) to info@precisioner.com, and we will provide a preliminary assessment at no charge.

2026-06-12

Recommended

More

Thermal Expansion Effects on Slide Clearance and Compensation Strategies

2026-07-23

Calibration of Simulation Boundary Conditions: Improving Accuracy Through Real-World Measurement

2026-07-13

Cooling Channel Design Based on Fourier's Law: Distance, Spacing, and Thermal Hot Spot Control

2026-07-06

Effect of Gate Velocity on Erosion: A Quantitative Relationship Based on a Power-Law Model

2026-06-26

The Mechanical Nature of Flash: Why Clamping Force Alone Won't Fix It

2026-06-18
Copyright 2009-2026 © Shenzhen Precisioner Diecasting Mold Co., Ltd.
Tel: +86 755 2344 8600 E-mail: info@precisioner.com
E-mail
info@precisioner.com
 erweima
wechat code
 tel
+86 755 2344 8600